The machine first puts the large apron in the original shape on the tank. The seal ring must be laid flat, and then the evaporator is vertically downward. Pay attention to the pump body to be flattened vertically downwards. It must be cleaned and disinfected before use. The specific steps: gently remove the madness; hold the spray pump by hand, gently pull it up and rotate the spray pipe and then pull it out (spray) to stir the stirring blade from the hand. Take out the casing (stirring); after the above parts are removed, slowly swing the hands up and out of the tank. If you have difficulty, it is necessary to wet the stainless steel evaporator and gasket. After cleaning the removed parts, reinstall them and operate in the opposite way.